Skip to main content

Table 1 EL performance of the single layer copolymers

From: White light emitting diode based on purely organic fluorescent to modern thermally activated delayed fluorescence (TADF) and perovskite materials

Material Device configuration Vturn-on [V] LE [cd/A] EQE Luminance [cd/m2] CIE (x,y) Refs.
P1 ITO/PEDOT:PSS/PG3R2/Ca/Al 6.0 0.10 820 0.33, 0.35 [29]
P2 ITO/PEDOT:PSS/WPF-G2R3/Ca/Al 5.8 1.59 3786 0.31, 0.34 [30]
P3 ITO/PEDOT/P3/Ca/Al 6.6 3.8 1.50 11,900 0.32, 0.36 [31]
P4 ITO/PEDOT:PSS/WPF-BT-3/Ca/Al 5.4 7.30 12,300 0.35, 0.32 [32]
P5 ITO/PEDOT:PSS/WPFB-BT-3/Ca/Al 6.6 2.53 3585 0.37, 0.34
P6 ITO/PEDOT/WP-P1/Ca/Al) 3.5 10.66 21,240 0.30, 0.40 [33]
P7 ITO/PEDOT/WRGB-P1/Ca/Al 4.0 7.30 12,710 0.31, 0.32 [34]
P8 ITO/PEDOT/WRGB-P2/Ca/Al 4.0 3.80 12,870 0.30, 0.31
P9 ITO/PEDOT/WP-B5O3/Ca/Al 3.5 12.8 18,480 0.31, 0.36 [35]
P10 ITO/PEDOT/WP-O3/Ca/Al 3.5 9.3 15,390 0.34, 0.34
P11 ITO/PEDOT:PSS/WP -B5G2R5/Ca/Al 3.5 8.6 11,510 0.33, 0.36 [36]
P12 ITO/PEDOT/PVK/PFO-R005-G010/Ba/Al 8.88 2.97 472.77 0.32, 0.34 [37]
P13 ITO/PEDOT/WPFTO-II/TPBI/Mg:Ag 5.5 4.87 2.22 5000 0.37, 0.36 [38]
P14 ITO/PEDOT:PSS/PFPCVB 025/Balq/LiF/Al 0.34 0.41 860 0.30, 0.36 [39]
P15 ITO/PEDOT:PSS/PFPCVB 50/Balq/LiF/Al 0.97 0.90 1750 0.33, 0.39
P16 ITO/PEDOT:PSS/P1/Ba/Al 22.62 0.30, 0.42 [40]
P17 ITO/PEDOT:PSS/FF-0.25/Al 4.1 5.17 3.10 9106 0.30, 0.31 [41]
P18 ITO/PEDOT:PSS/P(FCPA-0.5)/Al 4.6 5862 0.30, 0.33 [42]
P19 ITO/PEDOT:PSS/P(FCPA-1)/Al 4.5 6184 0.31, 0.32
P20 ITO/PEDOT:PSS/FCP 2.5/Al 3.9 6.34 9332 0.33, 0.34 [43]
P21 ITO/PEDOT:PSS/FBPAN 0.5/Al 1.4 7.8 13,455 0.32, 0.31 [44]
P22 ITO/PEDOT:PSS/WDP-1/TPBi/LiF/Al 4.47 7.82 9753 0.31, 0.33 [45]
P23 ITO/PEDOT:PSS/WDT-1/TPBi/LiF/Al 4.14 4.57 7436 0.35, 0.34