Skip to main content

Table 1 Cycling performance of systems with typical fillers

From: PEO based polymer-ceramic hybrid solid electrolytes: a review

Fillers Systems Test condition With fillers References
10 wt% Al2O3 LiFePO4-PEO/LiCF3SO3-Li C/5, 90 °C 125 mAh/g over 50 cycles [43]
10 wt% LiAlO2 LiFePO4-PEO/LiTFSI/SN-Li C/10, 60 °C 120 mAh/g over 25 cycles [44]
20 wt% LAGP LiFePO4-PEO/LiTFSI-Li 1C, 60 °C 108 mAh/g over 50 cycles [45]
5 wt% LLTO LiFePO4-PEO/LiTFSI-Li C/2, 60 °C 123 mAh/g over 100 cycles [46]
10 wt% LLZO LiFePO4-PEO/LiTFSI-Li C/10, 45 °C 158.7 mAh/g over 80 cycles [47]
10 wt% LLZTO LiFePO4-PEO/LiTFSI-Li C/5, 55 °C 139.1 mAh/g over 100 cycles [48]