Page 5 of 9
Using reinforcement learning, a deep Q-network was used to design polarization-independent, perfect solar absorbers. The deep Q-network selected the geometrical properties and materials of a symmetric three-la...
Modern electronic and photonic devices rely on single-crystalline thin film semiconductors for high performance and reproducibility. The emerging halide perovskites have extraordinary electronic and photonic p...
We have developed the low-temperature conformal ZnO nanowire fabrication on flexible plastic substrates by utilizing the solution-processible metal seed-assisted hydrothermal ZnO crystallization. Structural ev...
As an alternative approach to the conventional deposition and photolithographic processes, the laser digital patterning (LDP) process, which is also known as the laser direct writing process, has attracted con...
We investigated CO oxidation behavior of doped cerium oxide fibers. Electrospinning technique was used to fabricate the inorganic fibers after burning off polymer component at 600 °C in air. Cu, Ni, Co, Mn, Fe...
Lithium (Li) metal is a promising anode for high-performance secondary lithium batteries with high energy density due to its highest theoretical specific capacity and lowest electrochemical potential among ano...
Among the number of hyperthermia materials, magnetic nanoparticles have received much attention. In this work, we studied the heating characteristics of uniform Fe@Fe3O4 core–shell nanoparticle under near-infrare...
In this work, the measured electrical characteristics of a fully depleted silicon-on-insulator (FDSOI) device and fin-shaped field-effect transistor (FinFET), whose gate electrode is connected in series to the...
Optical metamaterials consist of artificially engineered structures exhibiting unprecedented optical properties beyond natural materials. Optical metamaterials offer many novel functionalities, such as super-r...
Iron oxide nanoparticles (IONs) are frequently used in various biomedical applications, in particular as magnetic resonance imaging contrast agents in liver imaging. Indeed, number of IONs have been withdrawn ...
Manganese oxide (MnO) nanocubes were fabricated and their surface were modified by ligand encapsulation or ligand exchange, to render them water-soluble. And then, MnO formed the hollow structure by etching us...
Construction of a fast, easy and sensitive neurotransmitters-based sensor could provide a promising way for the diagnosis of neurological diseases, leading to the discovery of more effective treatment methods....
ZnO nanoparticles are widely used in biological, chemical, and medical fields, but their toxicity impedes their wide application. In this study, pristine ZnO NPs (~ 7 nm; ~ 18 nm; ~ 49 nm) and lipid-coated ZnO...
This work reports on a rapid diagnostic platform for the detection of Plasmodium falciparum lactate dehydrogenase (PfLDH), a representative malaria biomarker, using a microfluidic microplate-based immunoassay. In...
Nanophotonics, manipulating light–matter interactions at the nanoscale, is an appealing technology for diversified biochemical and physical sensing applications. Guided-wave nanophotonics paves the way to mini...
Rechargeable metal-ion batteries are considered promising electric storage systems to meet the emerging demand from electric vehicles, electronics, and electric grids. Thus far, secondary Li-ion batteries (LIB...
We developed the microfluidic co-culture platform to study photothermal therapy applications. We conjugated folic acid (FA) to target breast cancer cells using reduced graphene oxide (rGO)-based functional nan...
An electron-rich fused indoloindole-based poly(indoloindole-selenophene vinylene selenophene) was synthesized and characterized. Soxhlet can be obtained by continuously purifying the product with a specific so...
Multilayer structure is one of the research focuses of thermoelectric (TE) material in recent years. In this work, n-type 800 nm Bi2Te3/(Pt, Au) multilayers are designed with p-type Sb2Te3 legs to fabricate ultra...
The CO2 adsorption selectivity of plain activated carbon nanofibers (ANF) is generally low. For enhancement, nitrogen functionalities favorable for CO2 adsorption are usually tethered to the ANF. In the current s...
Gold particles have been widely used in the treatment of prostate cancer due to their unique optical properties, such as their light-heat conversion in response to near-infrared radiation. Due to well-defined ...
Water is one of the most important resources for human survival and development. Efficient wastewater treatment techniques such as coagulation, filtration, ozonation, and reverse osmosis have been studied to r...
Atherosclerosis is a major contributor to many cardiovascular events, including myocardial infarction, ischemic stroke, and peripheral arterial disease, making it the leading cause of death worldwide. High-den...
Demand on optical or photonic applications in the visible or short-wavelength infrared (SWIR) spectra, such as vision, virtual or augmented displays, imaging, spectroscopy, remote sensing (LIDAR), chemical rea...
A method to directly collect negatively charged nucleic acids, such as DNA and RNA, in the biosamples simply by applying an electric field in between the sample and collection buffer separated by the nanofilte...
Owing to its precise manipulation in nanoscale, DNA as a genetic code becomes a promising and generic material in lots of nanotechnological outstanding exploitations. The nanoscale assembly of nucleic acids in...
In2O3 nanoparticle (NP)-decorated WO3 nanorods (NRs) were prepared using sol–gel and hydrothermal methods. The In2O3 NRs and WO3 NPs were crystalline. WO3 NP-decorated In2O3 NRs were also prepared using thermal e...
Many methods for early diagnosis of the disease use biomarker tests, which measure indicators of biological state in body fluids or blood. However, a limitation of these methods is their low sensitivity to bio...
Ag–Cu–Pt–Pd quadrometallic nanoparticles which small Pt and Pd nanoparticles were attached on the surface of AgCu Janus nanoparticles were firstly synthesized by sequential reduction of Pt and Pd precursor in ...
Circulating tumor cells (CTCs) are receiving a great amount of scientific interest as a diagnostic biomarker for various types of cancer. Despite the recent progress in the development of highly sensitive CTC ...
Tissue engineering uses a combination of cell biology, chemistry, and biomaterials to fabricate three dimensional (3D) tissues that mimic the architecture of extracellular matrix (ECM) comprising diverse inter...
A fluorescent fullerene nanoparticle (NP)-based lateral flow immunochromatographic assay (LFIA) was developed for the rapid and quantitative detection of C-reactive protein (CRP) in serum. The polyclonal CRP-a...
We report a visual detection of Cr(VI) ions using silver-coated gold nanorods (AuNR@Ag) as sensing probes. Au NRs were prepared by a seed-mediated growth process and AuNR@Ag nanostructures were synthesized by ...
High-quality GaN micro/nano columns were prepared with self-organized catalytic-free method. Young’s modulus of GaN nanocolumns were measured under both compressive stress and tensile stress. It was found that...
In recent years, MoS2 has emerged as a prime material for photodetector as well as phototransistor applications. Usually, the higher density of state and relatively narrow bandgap of multi-layer MoS2 give it an e...
White organic/polymer light emitting diode (WOLED/WPLED) processed from solution has attracted significant research interest in recent years due to their low device production cost, device flexibility, easy fa...
Sensors are becoming more demanding in all spheres of human activities for their advancement in terms of fabrication and cost. Several methods of fabrication and configurations exist which provide them myriad ...
Because dopamine (DA) is one of the most critical neurotransmitters that influence a wide variety of motivated human behaviors, it is necessary to develop a facile diagnostic tool that can quantify the physiol...
The ability to rationally tune and add new end-groups in polymers can lead to transformative advances in emerging self-healing materials. Self-healing networks manipulated by supramolecular strategies such as ...
We used a deep learning network to find the frequency of a noisy sinusoidal wave. A three-layer neural network was designed to extract the frequency of sinusoidal waves that had been combined with white noise ...
Metal halide perovskite light-emitting diodes (PeLEDs) are emerging as a promising candidate for next-generation optoelectronic devices. The efficiency of PeLEDs has developed explosively in a short time, but ...
Soft and conformable electronics are emerging rapidly and is envisioned as the future of next-generation electronic devices where devices can be readily deployed in various environments, such as on-body, on-sk...
We have explored the effect of post-annealing on the electrical properties of an indium gallium zinc oxide (IGZO) transistor with an Al2O3 bottom gate dielectric, formed by a sol–gel process. The post-annealed IG...
Nanotechnology has the potential to circumvent several drawbacks of conventional therapeutic formulations. In fact, significant strides have been made towards the application of engineered nanomaterials for th...
The Functional Upstream Domain (FUD) peptide is a potent inhibitor of fibronectin assembly and a therapeutic candidate for disorders linked with hyperdeposition of fibronectin-modulated ECM proteins. Most rece...
A variety of biomimetic stimuli-responsive soft grippers that can be utilized as intelligent actuators, sensors, or biomedical tools have been developed. This review covers stimuli-responsive materials, fabric...
Displays play a significant role in delivering information and providing visual data across all media platforms. Among displays, the prominence of reflective displays is increasing, in the form of E-paper, whi...
This paper presents a physically valid quasi-ballistic drain current model applicable for nanoscale symmetric Double Gate (SDG) MOSFETs. The proposed drain current model includes both diffusive and ballistic t...
Hydrogel actuators, that convert external energy, such as pH, light, heat, magnetic field, and ion strength, into mechanical motion, have been utilized in sensors, artificial muscles, and soft robotics. For a ...
There have been tremendous efforts to develop new synthetic methods for creating novel nanoparticles (NPs) with enhanced and desired properties. Among the many synthetic approaches, NP synthesis through ion ex...
Citation Impact 2023
Journal Impact Factor: 13.4
5-year Journal Impact Factor: 10.7
Source Normalized Impact per Paper (SNIP): 1.842
SCImago Journal Rank (SJR): 2.222
Speed 2023
Submission to first editorial decision (median days): 32
Submission to acceptance (median days): 76
Usage 2023
Downloads: 604,251
Altmetric mentions: 73
