Articles

Sort by
Previous Page Page 1 of 5 Next Page
  1. Research

    Deep tissue penetration of nanoparticles using pulsed-high intensity focused ultrasound

    Recently, ultrasound (US)-based drug delivery strategies have received attention to improve enhanced permeation and retention (EPR) effect-based passive targeting efficiency of nanoparticles in vitro and in vi...

    Dong Gil You, Hong Yeol Yoon, Sangmin Jeon, Wooram Um, Sejin Son, Jae Hyung Park, Ick Chan Kwon and Kwangmeyung Kim

    Nano Convergence 2017 4:30

    Published on: 8 November 2017

  2. Letters

    Swift tuning from spherical molybdenum microspheres to hierarchical molybdenum disulfide nanostructures by switching from solvothermal to hydrothermal synthesis route

    Herein, we report the synthesis of metallic molybdenum microspheres and hierarchical MoS2 nanostructures by facile template-free solvothermal and hydrothermal approach, respectively. The morphological transition ...

    Nilam Qureshi, Sudhir Arbuj, Manish Shinde, Sunit Rane, Milind Kulkarni, Dinesh Amalnerkar and Haiwon Lee

    Nano Convergence 2017 4:25

    Published on: 29 September 2017

  3. Research

    Lead-free perovskite solar cells using Sb and Bi-based A3B2X9 and A3BX6 crystals with normal and inverse cell structures

    Research of CH3NH3PbI3 perovskite solar cells had significant attention as the candidate of new future energy. Due to the toxicity, however, lead (Pb) free photon harvesting layer should be discovered to replace ...

    Ajay Kumar Baranwal, Hideaki Masutani, Hidetaka Sugita, Hiroyuki Kanda, Shusaku Kanaya, Naoyuki Shibayama, Yoshitaka Sanehira, Masashi Ikegami, Youhei Numata, Kouji Yamada, Tsutomu Miyasaka, Tomokazu Umeyama, Hiroshi Imahori and Seigo Ito

    Nano Convergence 2017 4:26

    Published on: 22 September 2017

  4. Research

    ITO nanoparticles reused from ITO scraps and their applications to sputtering target for transparent conductive electrode layer

    In this study, ITO nanoparticles (ITO-NPs) were reused from ITO target scraps to synthesize low cost ITO-NPs and to apply to make sputtering target for transparent conductive electrodes (TCEs). By controlling ...

    Sung-Jei Hong, Sang-Hyun Song, Byeong Jun Kim, Jae-Yong Lee and Young-Sung Kim

    Nano Convergence 2017 4:23

    Published on: 6 September 2017

  5. Research

    All-inorganic inverse perovskite solar cells using zinc oxide nanocolloids on spin coated perovskite layer

    We confirmed the influence of ZnO nanoparticle size and residual water on performance of all inorganic perovskite solar cells. By decreasing the size of the ZnO nanoparticles, the short-circuit current density (J...

    Naoyuki Shibayama, Hiroyuki Kanda, Shin-ichi Yusa, Shota Fukumoto, Ajay K. Baranwal, Hiroshi Segawa, Tsutomu Miyasaka and Seigo Ito

    Nano Convergence 2017 4:18

    Published on: 28 July 2017

  6. Research

    Understanding dual precipitation strengthening in ultra-high strength low carbon steel containing nano-sized copper precipitates and carbides

    Low carbon ferritic steel alloyed with Ti, Mo and Cu was hot rolled and interrupt cooled to produce nano-sized precipitates of copper and (Ti,Mo)C carbides. The steel had a tensile strength of 840 MPa, an incr...

    M. P. Phaniraj, Young-Min Shin, Woo-Sang Jung, Man-Ho Kim and In-Suk Choi

    Nano Convergence 2017 4:16

    Published on: 3 July 2017

    The Erratum to this article has been published in Nano Convergence 2017 4:20

  7. Research

    Oxidation behavior of AlN/CrN multilayered hard coatings

    We report on the oxidation behavior of AlN/CrN multilayers at 900 °C, deposited by radio frequency magnetron sputtering. It is shown that oxidation in this system is controlled by diffusion of Cr towards the s...

    Darius Tytko, Pyuck-Pa Choi and Dierk Raabe

    Nano Convergence 2017 4:15

    Published on: 27 June 2017

  8. Research

    Rapid and conformal coating of polymer resins by airbrushing for continuous and high-speed roll-to-roll nanopatterning: parametric quality controls and extended applications

    We present a facile and scalable coating method based on controlled airbrushing, which is suitable for conformal resin coating in continuous roll-to-roll (R2R) nanoimprint lithography (NIL) process. By control...

    Jae Hyuk Lee, Minho Na, Jiyeop Kim, Kangeun Yoo, Jaekyu Park, Jeong Dae Kim, Dong Kyo Oh, Seungjo Lee, Hongseok Youn, Moon Kyu Kwak and Jong G. Ok

    Nano Convergence 2017 4:11

    Published on: 1 May 2017

  9. Review

    Biomolecular engineering for nanobio/bionanotechnology

    Biomolecular engineering can be used to purposefully manipulate biomolecules, such as peptides, proteins, nucleic acids and lipids, within the framework of the relations among their structures, functions and p...

    Teruyuki Nagamune

    Nano Convergence 2017 4:9

    Published on: 24 April 2017

  10. Review

    A perspective on auxetic nanomaterials

    Nanomaterials have recently been found to exhibit auxetic behavior, or a negative Poisson’s ratio, whereby the lateral dimensions of the material expand, rather than shrink, in response to applied tensile load...

    Harold S. Park and Sung Youb Kim

    Nano Convergence 2017 4:10

    Published on: 16 April 2017

  11. Research

    Morphology controlled synthesis of 2-D Ni–Ni3S2 and Ni3S2 nanostructures on Ni foam towards oxygen evolution reaction

    Catalysts for oxygen evolution reactions (OER) are at the heart of key renewable energy technologies, and development of non-precious metal catalysts with high activity and stability remain a great challenge i...

    Nitin Kaduba Chaudhari, Aram Oh, Young Jin Sa, Haneul Jin, Hionsuck Baik, Sang Gu Kim, Suk Joong Lee, Sang Hoon Joo and Kwangyeol Lee

    Nano Convergence 2017 4:7

    Published on: 28 March 2017

Previous Page Page 1 of 5 Next Page

Advertisement