Page 8 of 9
There is a growing interest in developing effective tools to better probe the central nervous system (CNS), to understand how it works and to treat neural diseases, injuries and cancer. The intrinsic complexit...
Over the past few years, there have been calls for novel antimicrobials to combat the rise of drug-resistant bacteria. While some promising new discoveries have met this call, it is not nearly enough. The majo...
Nanotechnology and bioengineering have converged over the past decades, by which the application of multi-functional nanoparticles (NPs) has been emerged in clinical and biomedical fields. The NPs primed to de...
Current stem cell therapy suffers low efficiency in giving rise to differentiated cell lineages, which can replace the original damaged cells. Nanomaterials, on the other hand, provide unique physical size, su...
This article discusses the use of nanotechnology for subcellular compartment isolation and its application towards subcellular omics. This technology review significantly contributes to our understanding on us...
Nanoimprint lithography (NIL) is a compelling technique for low cost nanoscale device fabrication. The precise and repeatable replication of nanoscale patterns from a single high resolution patterning step mak...
Silver nanowire-based flexible transparent electrodes have critical problem, in spite of their excellent electrical and optical properties, that the electrical conductance and transparency degrade within sever...
Inspired by photosynthesis, artificial systems for a sustainable energy supply are being designed. Each sequential energy conversion process from light to biomass in natural photosynthesis is a valuable model ...
Plasmonic nanostructures strongly localize electric fields on their surfaces via the collective oscillations of conducting electrons under stimulation by incident light at a certain wavelength. Molecules adsor...
Biomaterials having cell adhesion ability are considered to be integral part of a cell chip. A number of researches have been carried out to search for a suitable material for effective immobilization of cell ...
We report simulation of nanostructured memristor device using piecewise linear and nonlinear window functions for RRAM and neuromorphic applications. The linear drift model of memristor has been exploited for ...
Graphene has been intensively studied for applications to high-performance sensors, but the sensing characteristics of graphene devices have varied from case to case, and the sensing mechanism has not been sat...
Since the report on long-term durable solid-state perovskite solar cell in 2012, perovskite solar cells based on lead halide perovskites having organic cations such as methylammonium CH3NH3PbI3 or formamidinium H...
The steady scaling-down of semiconductor device for improving performance has been the most important issue among researchers. Recently, as low-power consumption becomes one of the most important requirements,...
Piezoelectric energy conversion that generate electric energy from ambient mechanical and vibrational movements is promising energy harvesting technology because it can use more accessible energy resources tha...
In this paper, the general characteristics and the scalability of Schottky barrier metal-oxide-semiconductor field effect transistors (SB-MOSFETs) are introduced and reviewed. The most important factors, i.e.,...
Sn-based oxide materials as an anode of lithium ion batteries (LIBs) suffer from the unavoidable mechanical stress originated from huge volume changes during lithiation/delithiation reactions. We synthesized t...
Organic non-volatile memory is advanced topics for various soft electronics applications as lightweight, low-cost, flexible, and printable solid-state data storage media. As a key building block, organic field...
Commercialization of organic solar cell (OSC) has faltered due to their low power conversion efficiency (PCE) compared to inorganic solar cell. Low electrical conductivity, low charge mobility, and short-range...
At present, the generation of heterostructures with two dimensional electron gas (2DEG) in amorphous LaAlO3 (a-LAO)/SrTiO3 (STO) has been achieved. Herein, we analysed thermal stability of 2DEG at a-LAO/STO inte...
As the market and related industry for wearable electronics dramatically expands, there are continuous and strong demands for flexible and stretchable devices to be seamlessly integrated with soft and curvili...
Nanoparticles formulated from biodegradable polymers like poly(lactic-co-glycolic acid) (PLGA) are being extensively investigated as drug delivery systems due to their two important properties such as biocompa...
With the ever-increasing development of nanotechnology, our society is being surrounded by possible risks related to exposure to manufactured nanomaterials. The consumer market already includes many products t...
Innovative engineered nanomaterials are at the leading edge of rapidly emerging fields of nanobiotechnology and nanomedicine. Meticulous synthesis, unique physicochemical properties, manifestation of chemical ...
The surface area of electrodeposited thin films of Ni, Co, and NiCo was evaluated using electrochemical double-layer capacitance, electrochemical area measurements using the [Ru(NH ...
We synthesized single-phase CoS2 on a large scale by adding graphene oxide of sufficient quantity via the hydrothermal method using cobalt acetate and thioacetamide as precursors; this produced the hybrid of CoS2
Electro-optic switching of reflection and refraction is experimentally demonstrated in metasurface liquid crystal cell. Negative metasurface is fabricated by focused-ion-beam milling, and twisted nematic cells...
The control of the optical activity and ellipticity of a medium has drawn considerable attention due to the recent developments in metamaterial design techniques and a deeper understanding of the light matter ...
Resolution of the conventional lens is limited to half the wavelength of the light source by diffraction. In the conventional optical system, evanescent waves, which carry sub-diffraction spatial information, ...
While most of the electronics industry is dependent on the ever-decreasing size of lithographic transistors, this scaling cannot continue indefinitely. To improve the performance of the integrated circuits, ne...
Commercialization of graphene based applications inevitably requires cost effective mass production. From the early days of research on graphene, direct liquid phase exfoliation (LPE) of graphite has been cons...
This paper reports a new type of transmitting mode electrochromic device that uses the high-contrast electrochromism of poly(3,4-ethylenedioxythiophene) (PEDOT) and operates at long-wavelength infrared (8–12 μ...
Neurochemicals such as dopamine (DA) and serotonin (S-HT) are linked to disorders such as Parkinson’s disease, epilepsy, addiction and many others. Detection of and monitoring these neurochemicals in vivo and in ...
In recent years, 2-dimensional (2D) materials such as graphene and h-BN have been spotlighted, because of their unique properties and high potential applicability. Among these 2D materials, transition metal di...
By means of ab initio calculations we show that morphology of 〈111〉-oriented silicon and germanium nanowires is defined by {112} and {011} facets. Changes in nanowire morphology are predicted to involve a partial...
Composited electrospun nanofibers made of temperature-responsive poly(N-isopropylacrylamide) (pNIPAM) and biodegradable poly (ε-caprolactone) (PCL) can be utilized for ‘on-demand’ and controlled drug release o...
Results of our ab initio calculations of 〈111〉-oriented GaP, GaAs, GaSb, InP, InAs and InSb nanowires with the zinc-blende structure indicate morphology to crucially affect their electronic properties. For these ...
Nanomaterial-delivery fabrication expects high-potential impacts on nanoscience, technology and industry, but still faces limited applicability mainly due to high-field requirement for liquid delivery, complic...
We developed the microfluidic light emitting diode (LED) sensor for methanol detection. The linear gradient-generating microfluidic device consists of two inlet and four outlet microchannels. The concentration...
A decade after the discovery of graphene flakes, exfoliated from graphite, we have now secured large scale and high quality graphene film growth technology via a chemical vapor deposition (CVD) method. With th...
Molecular imaging plays an important role in the non-invasive diagnosis and the guiding or monitoring of disease treatment. Different imaging modalities have been developed, and each method possesses unique st...
Functionalization of the hematite photoanode with the photosynthetic light antenna protein C-phycocyanin (PC) can yield substantial enhancement of the photocurrent density. Photoelectrochemical cells with bio-...
High performance torsional and tensile artificial muscles are described, which utilize thermally- or electrochemically-induced volume changes of twist-spun, guest-filled, carbon nanotube (CNT) yarns. These yar...
Studies of the photoelectric properties of complex oxides have recently focused on materials with a narrow band gap because the wide band gap of complex oxides is one of the major obstacles limiting their use ...
In this paper, we study the effect of local thermal non-equilibrium on the linear thermal instability in a horizontal layer of a Newtonian nanofluid. The nanofluid layer incorporates the effect of Brownian mot...
In this paper, SiO2 nanoparticle doped polymer dispersed liquid crystal (PDLC) lenses were made from a mixture of prepolymer, E7 liquid crystal and SiO2 nanoparticles by the polymerization induced phase separatio...
We report the fabrication and electrical characterization of a wafer-scale array of organic complementary inverters using single-crystal 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-PEN) and fullerene (C60)...
We describe a systematic study of coating thickness and their effect on different core sizes for the optimized preparation of highly sensitive manganese-doped magnetic nanocrystals (MnMNCs) to be served as mag...
Nickel and nickel oxide nanocrystals in their pure phase are carefully embellished by a facial method on oxygen-functionalized multi-walled carbon nanotubes (O-MWCNTs) using nickel nitrate (NN) was effectively...
Since the discovery of X-rays over a century ago the techniques applied to the engineering of X-ray sources have remained relatively unchanged. From the inception of thermionic electron sources, which, due to ...
Citation Impact 2023
Journal Impact Factor: 13.4
5-year Journal Impact Factor: 10.7
Source Normalized Impact per Paper (SNIP): 1.842
SCImago Journal Rank (SJR): 2.222
Speed 2023
Submission to first editorial decision (median days): 32
Submission to acceptance (median days): 76
Usage 2023
Downloads: 604,251
Altmetric mentions: 73
